|Typical Pressure Ranges:||
|Body Material (Standard):||
|Body Material (Optional):||
The 3/4″ GSD6, like others in the General Service Series regulators, can be used across a wide range of pressures, from as low as millibar (inches of water column) up to 400 psig / 27 bar(g).
The GS ‘General Services’ is a family of back pressure regulators useful for gas, liquid, or mixed gas & liquid service. The GS design uses multiple parallel internal orifice with direct diaphragm sealing technology to control back pressure with great accuracy where high temperatures, aggressive chemicals, mixed gas/liquid phase media, or other demanding conditions exist. The GS series is a dome loaded pilot operated design. Pilot pressure may be provided by a remote manually adjusted set point regulator or with an electronic pressure regulator to allow automated or closed loop control of your back pressure. The GS series is ideally sized where accurate control is needed in pilot plant or manufacturing scale applications.
Have questions about which back pressure regulator is right for your application?
Contact one of our application engineers here: https://www.equilibar.com/contact/
Control the Flow of a Pump With a Back Pressure Regulator
13.8 lbs (6.26 kg)
DIM A – 6.00 in (152 mm)
DIM B – 2.01 in (51 mm)
DIM A – 6.25 in (159 mm)
DIM B – 2.34 in (59 mm)
DIM A – 5.25 in (159 mm)
DIM B – 2.50 in (64 mm)
Optional: BSPP; Swagelok VCO®; Swagelok VCR®; 150# Flange; 300# Flange; SAE; Tube Stub; custom