U10L High Pressure Ultra Low Flow Back Pressure Regulator -

U10L High Pressure Ultra Low Flow Back Pressure Regulator

Port Sizes:
1/16"1/8"1/4"
Max Pressure (Std Body Mat’l)
10000 psig / 680 bar(g)
Body Material (Standard):
Stainless Steel 316/316L
Body Material (Optional):
Hastelloy C276, Custom
Max CV:
(U10L0): 0.01; (U10L1, U10L2): 0.05
Key Applications:

High Pressure Core Testing
Pore Pressure Transmission Testing
Nano-Flow for Core Analysis

Product Description
U10L High Pressure Ultra Low Flow Back Pressure Regulator

U10L High Pressure Ultra Low Flow Back Pressure Regulator

Equilibar U10L back pressure regulators (BPRs) control pressure up to 10,000 psi and come in 1/16″, 1/8″, and 1/4″ port sizes. They are recommended in applications where there is very low flow. The U10L BPRs are in Equilibar’s Research Series back pressure regulators.

Equilibar’s Research Series is designed to meet the demanding requirements catalyst research and high pressure reactor control applications. All our Research products hold stable pressure across very wide flow ranges, and can handle liquids, gases, or multi-phase mixtures. These products are commonly used with highly aggressive chemicals, and can perform at temperatures up to 450C.

Equilibar Research Series units are 1:1 dome-loaded, meaning that a pilot pressure must be supplied to the dome of the BPR equal to the desired set-point. This pilot pressure can be supplied by a manual gas regulator, or by an electronic pressure regulator for computer automation.

Contact an application engineer for more information about how Equilibar fluid control products can be applied in your process.

Videos
U10L High Pressure Ultra Low Flow Back Pressure Regulator

U10L High Pressure Ultra Low Flow Back Pressure Regulator

How the Equilibar back pressure regulator works



How to rebuild an Equilibar back pressure regulator

Downloads
U10L High Pressure Ultra Low Flow Back Pressure Regulator

U10L High Pressure Ultra Low Flow Back Pressure Regulator

Applications
U10L High Pressure Ultra Low Flow Back Pressure Regulator

U10L High Pressure Ultra Low Flow Back Pressure Regulator

Additional Specs
U10L High Pressure Ultra Low Flow Back Pressure Regulator

U10L High Pressure Ultra Low Flow Back Pressure Regulator

Weight:

3.0 lb (1.4 kg)

Dimensions:

Dimensional Sketch of GS Series Back Pressure Regulator

 

Dim A: 3 in (76 mm)
Dim B: 2.1 in (53 mm)

 

 

Fitting/Threads:

Standard: NPT
Optional: HiP (High Pressure); Autoclave Speed‐Bite W125; custom

How It Works
U10L High Pressure Ultra Low Flow Back Pressure Regulator

U10L High Pressure Ultra Low Flow Back Pressure Regulator

Related Products

Equilibar News
Schematic showing vacuum holding table with vacuum regulator

Meeting the challenges of vacuum holding applications

Vacuum technology is commonly used to hold objects in place for processing or positioning. Vacuum table, vacuum conveyor and vacuum pick-and-place operations are examples of this type of application. In most vacuum holding applications, flow rate and pressure vary significantly during start-up and when disruptions occur in the manufacturing process. While some vacuum applications are Read More

Read More