GSDH4 General Service Back Pressure Regulator | Equilibar

GSDH4 General Service Back Pressure Regulator

Port Sizes:
1/2"
Max Pressure (Std Body Mat’l)
1400 psig / 97 bar(g)
Body Material (Standard):
Stainless Steel 316/316L
Body Material (Optional):
Hastelloy C276, Custom
Max CV:
3.2
Key Applications:
Product Description
GSD4 General Service Back Pressure Regulator

GSDH4 General Service Back Pressure Regulator

The GSDH4 is the highest pressure version of the 1/2 inch port models. The GSDH4 is often used to control the discharge pressure of high flow hydraulic pump recirculation loops when high accuracy and resolution are needed.

GS Series

The GS ‘General Services’ is a family of back pressure regulators useful for gas, liquid, or mixed gas & liquid service. The GS design uses multiple parallel internal orifices with direct diaphragm sealing technology to control back pressure with great accuracy where high temperatures, aggressive chemicals, mixed gas/liquid phase media, or other demanding conditions exist. The GS series is a dome loaded pilot operated design. Pilot pressure may be provided by a manually adjusted set point regulator or with an electronic pressure regulator to allow automated or closed loop control of your back pressure. The pilot regulator may be located remotely or at the process depending on design requirement. The GS series is ideally sized where accurate control is needed in pilot plant or manufacturing scale applications.

Contact an application engineer for help finding the right back pressure regulator for your process.

Videos
GSD4 General Service Back Pressure Regulator

GSDH4 General Service Back Pressure Regulator

Two Phase Flow Pressure Regulator

How Equilibar Back Pressure Regulator Works

Downloads
GSD4 General Service Back Pressure Regulator

GSDH4 General Service Back Pressure Regulator

Applications
GSD4 General Service Back Pressure Regulator

GSDH4 General Service Back Pressure Regulator

Additional Specs
GSD4 General Service Back Pressure Regulator

GSDH4 General Service Back Pressure Regulator

Weight:

Coming Soon

Dimensions:

Dimensional Sketch of GS Series Back Pressure Regulator

 

Dim A: 5 in (127 mm)
Dim B: 1.98 in (50 mm)

 

 

Fitting/Threads:

Standard: NPT
Optional: BSPP; Swagelok VCO®; Swagelok VCR®; 150# Flange; 300# Flange; SAE; Tube Stub; custom

How It Works
GSD4 General Service Back Pressure Regulator

GSDH4 General Service Back Pressure Regulator

Related Products

Equilibar News
Schematic showing vacuum holding table with vacuum regulator

Meeting the challenges of vacuum holding applications

Vacuum technology is commonly used to hold objects in place for processing or positioning. Vacuum table, vacuum conveyor and vacuum pick-and-place operations are examples of this type of application. In most vacuum holding applications, flow rate and pressure vary significantly during start-up and when disruptions occur in the manufacturing process. While some vacuum applications are Read More

Read More