Maintenance, Spare Parts and Rebuild Information -

Maintenance, Spare Parts and Rebuild Information

Maintaining an Equilibar Back Pressure Regulator

MAINTENANCE NOTES

Equilibar recommends the following for improved product longevity and performance:

  • Maintain a strainer or filter upstream of the back pressure regulator.
  • Conduct an annual inspection of the diaphragm integrity, especially for applications where there is strong or regular pulsing (i.e. reciprocating pump, etc.). Increased inspection frequency may be necessary for extreme condition applications.
  • After inspection, it is recommended to clean the regulator prior to reassembly. (Follow assembly instructions in the Installation & Maintenance Guide shipped with the product, or download the Installation & Maintenance Guide from our website).

REPLACEMENT PARTS

It is recommended to order spare parts prior to performing maintenance. The following replacement part kits are available for order:

  • RBK – Rebuild Kits – replacement parts for O-rings AND diaphragms
  • DI – Diaphragm Kit – replacement parts for diaphragms only
  • OR – O-ring Kit – replacement parts for the O-rings only

Contact Us to place an order

Special product circumstances

  • The Ultra Low Flow UxL Series and The Zero Flow ZF back pressure regulators have extra internal parts that may need to be replaced on an infrequent basis.

Contact an application engineer to discuss what type of replacement parts you require.

INSTALLATION & REBUILD INSTRUCTIONAL VIDEOS

The videos below demonstrate how simple it is to rebuild an Equilibar back pressure regulator.

How to Rebuild an Equilibar Research or GS Series regulator

The regulator in this video is a research series back pressure regulator, but the process is similar for our GS series back pressure regulators.

Tips for installing an O-Ring in an Equilibar GSD6 back pressure regulator

In certain cases, it may be tricky to insert the O-Ring into the GSD6 back pressure regulator. For tips from our engineers, watch the video below.


How to rebuild an Equilibar UxL back pressure regulator

The UxL back pressure regulator has a different design, so the rebuild instructions include an additional step. The video below demonstrates how to replace a “removable seat” in a UxL back pressure regulator.

How to rebuild an Equilibar ZF back pressure regulator

The ZF back pressure regulator also has a different design with additional steps. The video below demonstrates how to rebuild a ZF back pressure regulator.


Tips for installing an O-ring in an Equilibar LF

If the O-ring in your repair kit appears to be too small, we recommend gently stretching out the O-ring as shown in this video with an Equilibar LF back pressure regulator.

How to Assemble an Equilibar BD Back Pressure Valve

The Equilibar BD Series valves are much larger than the research and general series (GS) regulators. This video gives tips for assembling these large BD back pressure valves.


How to Insert an O-Ring in an Equilibar BD Valve

 

Equilibar News
Equilibar back after Hurricane Helene

The Equilibar team is back at work after Hurricane Helene

We’re happy to report that the Equilibar team is fully back at work this week following Hurricane Helene. While Helene wreaked havoc across the Western North Carolina mountains, we feel extremely lucky that all of our team members and their families are safe and our facilities had only minor issues. Once we could return to Read More

Read More