Electronic Vacuum Regulator | Equilibar Precision Pressure Control

Electronic Vacuum Regulators

Electronic Vacuum Regulators to Control Your Process

Equilibar electronic vacuum regulators allow vacuum control through a computerized command signal. The command signal is first sent to a small electronic regulator that produces a pilot signal to the reference port of the dome-loaded Equilibar Vacuum Regulator (EVR) to control the process pressure.

Equilibar offers a line of precision electronic pressure regulators to provide this pilot reference signal. The QPV ultra-resolution and the EPR-30Hg models have virtually no hysteresis or deadband, resulting in the capability to make precise adjustments.

These regulators can be used in open loop mode or closed loop mode. In open loop mode, the vacuum setpoint is commanded using a computerized signal sent to the electronic pilot regulator. The pilot regulator produces that commanded pressure onto the EVR reference port to keep the process vacuum very close to the setpoint value. Open loop mode will result in a slight variability in vacuum pressure as flow rates increase.

In closed loop, or PID mode, the process vacuum pressure is monitored by a separate pressure sensor close to the process, and the command signal sent to the pilot regulator is adjusted to bring that process pressure to match the desired setpoint. This PID action can be accomplished inside the QPV electronic pressure regulator, or in the existing process control system. Closed loop control will result in more accuracy over a wide range of flow rates.

Learn more about how our vacuum regulators work.
Contact an application engineer to discuss ways your process can benefit from electronic vacuum control.

image of anodized aluminum Equilibar vacuum regulator with QPV1 electronic pressure regulator pilot
Electronic Vacuum Regulator
Anodized Aluminum EVR-GSD8 with integrated QPV electronic pilot regulator

Electronic Vacuum Regulator Details

This table details Equilibar Vacuum Regulators with inlet port sizes from 1/4″ to 1″.
Equilibar also offers electronic vacuum regulators in port sizes from 1.5 to 4″.

Model Inlet/Outlet Port Reference Port Standard Body Materials Diameter Height Cv Range (precision) Available End Fittings
(inch) Min Max Std Available
EVR-GSD2 ¼” 1/8″ SS316 (std) Anodized Aluminum
3.0 1.3 1E-3 1.0 NPT 150# Flange BSP SAE VCO style VCR style
EVR-GSD3 3/8″ 3.5 1.35 1E-3 1.8
EVR-GSD4 ½” 4.5 1.6 1E-2 3.2
EVR-GSD6 3/4″ 6.0 2.0 1E-2 5.5
EVR-GSD8 1″ 7.0 2.6 1E-2 8.5

Request a Quote Download Brochure

Other Equilibar Vacuum Control Products:

image of equilibar high precision vacuum regulator EVR with mechanical pilotHigh Precision Vacuum Regulators 1/4" to 1" 0 - 30 inHg / 762 mm Hg
image of Equilibar High Flow Vacuum Regulator with mechanical vacuum pilot regulatorHigh Flow Vacuum Valves 1.5" to 4" 0 - 30 inHg / 762 mm Hg
image of anodized aluminum Equilibar vacuum regulator with QPV1 electronic pressure regulator pilotElectronic Vacuum Regulators 1/4" to 1" 0 - 30 in Hg / 762 mm Hg
image of Equilibar BD24 with QPV electronic pressure control pilotLarger Electronic Vacuum Valves 1.5" to 4" 0 - 30 in Hg / 762 mm Hg
photo collage of vacuum pilot regulatorVacuum Pilot Regulators mechanical, electronic and remote sensing
Equilibar News
schematic for tff tmp

Pharmaceutical Manufacturing Case Study: single-use BPR improves Trans Membrane Pressure in novel Single Pass TFF control strategy

This summer, the Journal of Membrane Science published a paper focusing on automated control of Trans Membrane Pressure (TMP) in a Single-Pass Tangential Flow Filtration (SP-TFF) system. Control was substantially improved by using an Equilibar® single-use dome-loaded multi-orifice back pressure regulator (BPR) rather than traditional technologies. Authored by Shashi Malladi, Michael Coolbaugh and other top Read More

Read More