{"id":37819,"date":"2022-09-28T15:01:56","date_gmt":"2022-09-28T19:01:56","guid":{"rendered":"https:\/\/www.equilibar.com\/?page_id=37819"},"modified":"2024-09-13T08:57:25","modified_gmt":"2024-09-13T12:57:25","slug":"equilibar-flow-control-using-eqda","status":"publish","type":"page","link":"https:\/\/www.equilibar.com\/ja\/flow-control-valves\/equilibar-flow-control-using-eqda\/","title":{"rendered":"Equilibar Flow Control using an EQ-DA Smart Controller"},"content":{"rendered":"

Equilibar\u00ae valves can easily be set up for flow control applications using a flow meter and control logic as explained on our flow control page.<\/a> <\/p>

To review the various methods of control systems for setting up an Equilibar flow control valve (FCV), please visit our “ getting started with flow control<\/a> ” page.<\/p>

On this page you will find specific information about using an EQ-DA smart controller and accompanying browser-based GUI to set up a flow control loop with an Equilibar FCV.<\/p>

Below is a schematic showing how the EQ-DA and Equilibar flow control system is set up in the demonstration video that follows. The EQ-DA communicates through a browser-based GUI installed in the laptop. It receives a flow signal from the flow meter and sends a pressure signal to the pilot port of the Equilibar FCV. For best performance, we recommend setting up the flow controller with guidance from an on-site controls engineer experienced in tuning feedback loops.<\/p>

\"\"<\/p>

Control using an EQ-DA smart controller and its browser-based GUI:<\/h3>

This video demonstrates how to set up the EQ-DA and use its accompanying browser-based GUI to control flow in a control loop using an Alicat flow meter and an Equilibar flow control valve.<\/p>